|
 |
| |
| |
|
Special: Anything that
requires special fabrication beyond our standard thread both end NPT
nipples. |
| |
|
Types of
Threads |
|
 |
|
-
N.P.S.L. -
Straight Pipe Threads Used for Loose Fittings Mechanical Joints with Locknuts.
-
N.P.S.M. -
Straight Pipe Threads used for Free-Fitting Joints or Fixtures.
-
N.P.T. -
Taper Pipe Threads for General Use (Found on Standard Pipe Nipples).
-
N.P.T.F. - Taper Pipe Threads Used
for Fuel and Oil Fittings (Makes a Pressure Tight Seal Without the Use of
Lubricant or Sealer).
-
N.P.S.H. -
Straight Pipe Threads Used to Make Hose Connectors.
|
|
|
|
Machining Process |
-
Plain Roller Cut
- End is cut with a Roller Pipe Cutter. No additional machining is
performed.
-
Square Ream
- A Machining Process That Cuts the End of the Pipe on a 90 Degree Angle to the
wall.
-
Ream & Chamfer
- A Machining Process that cuts the End of the pipe on an Angle (Usually 38 to
42 Degrees) to the wall.
-
Victaulic Groove
- A Groove Cut Into the Wall of the Pipe Used to Make an Air Tight Connection
without Threads.
-
O.D. & I.D. Machining
- Per Print Only.
-
1/8" - 1" Diameter Pipe Bending
- Per Print Only.
|
 |
|